Tork Craft Doweling And Pocket Hole Jig Kit

  • Product UPC: 6009515823610

  • Retail Price: R695.00
    You save: R195.00  (28%)
    Our Price: R500.00

    Ask a question

    Add to Cart:

    Log In to be able to add this product to your Wish List.

    435 reward points

    Pocket hole and doweling jig kit

    DOW20000 pocket hole jig

    The kit has a dual function. It is both a doweling and a pocket hole jig.

    The kit consists of the following:

    • (x1) Drill guide with handle
    • (x1) Square drive bit
    • (x1) Hex key wrench
    • (x1) Drill stopper
    • (x1) 6mm wood drill bit
    • (x1) 8mm wood drill bit
    • (x1) 10mm wood drill bit
    • (x10) 6x30mm wooden dowel pins
    • (x10) 8x40mm wooden dowel pins
    • (x10) 10x40mm wooden dowel pins
    • (x10) Wooden plugs
    • (x20) Wood screws

    To use the kit with both functions, you need the following:

    • A portable drill with chuck capacity of 10mm or higher.
    • A G-clamp
    • A Mallet

    Here is an illustration of how the pocket hole jig works with instructions:

    Pocket hole jig illustraion

    Setting up the pocket hole jig correctly:

    1. Tilt the front stop to the downward position.
    2. Clamp the jig down flush with the front stop against the timber.
    3. Ensure that the Drill stopper (collar) is tightened on the 9.5mm drill bit in the correct depth stop position.
    4. Tighten the 9.5mm drill bit in the chuck of the portable drill.

    Always double check to make sure all the above steps are secure before proceeding.

    Drill into the timber until the depth stop is in contact with the jig.

    Remove the G-clamp and the jig. Align the timbers to form the joint. Clamp the timbers together to prevent movement whilst driving in the wood screw with the supplied square drive bit. The wooden plugs can be inserted with a mallet afterwards.

    Using the jig for doweling

    Doweling jig

    Setting up the doweling jig correctly:

    1. Insert the supplied handle into the pocket drilling guide holes.
    2. Tilt the front end stop to the upward position
    3. Adjust the guide collar to the corresponding diameter drill bit 6,8 or 10mm by loosening the blue knob.
    4. Align the jig on the timber with the mearuments embosed on the base of the jig

    Make sure that the drill is perpendicular with the timber before proceeding.

    • Model:
    • Stock Level: In Stock
    • Manufactured by: Tork Craft
    • UPC: 6009515823610
    • Category: Dowels

    Ask a question about the Tork Craft Doweling And Pocket Hole Jig Kit

    Sorry we ran out!

    Simply enter your details below and we will send you an e-mail when the item is back in stock!

    Secure 128bit encryption. Scan Me !! Visit TechnoPro on ShopMania
    Copyright © 2019 TechnoPro. South Africa - Your trusted online shop
    Parse Time: 3.142 - Number of Queries: 15083 - Query Time: 1.6459943414