Tork Craft Diamond Core Bit 8mm For Hard Tiles And Porcelain

  • Product UPC: 6009515804077

  • Retail Price: R500.00
    You save: R140.00  (28%)
    Our Price: R360.00

    Ask a question

    Sold out

    Log In to be able to add this product to your Wish List.

    313 reward points

    Ø8mm Diamond core bit


    The diamond core bit is used to drill holes in:

    • Ceramic tiles
    • Marble
    • Grade 5 porcelain (hardest)
    • Granite
    • Glass
    • Slate

    The diamond core cuts faster, smoother and lasts longer than any other core drills.

    How to use the diamond core bit:

    The diamond core drill bit must be used with water at all times when drilling. The water serves as a coolant to prevent the diamonds from overheating. The maximum allowable temperature for a diamond core bit is 500°C.

    There is no pilot drill with the diamond core bit. A low rpm rotary drill with a planetary gearbox is required to be used with a diamond core bit. It is possible to use a cordless drill, but in the lowest gear setting. No hammer action is used.

    1. Tightly fasten the diamond core bit in the drill's chuck.
    2. Keep the bit steady at a 45° angle with the starting point on the edge of the assigned area to be drilled whilst the bit is rotating.
    3. A notch will be made (this is normal). Gradually move the drill from 45° to 90° and continue drilling until finished.
    4. Allow the diamond core bit to cool down completely before proceeding to drill another hole.

    Water can be applied by:

    • spraying water on the surface,
    • using a wet sponge,
    • attaching a water feed device. This is necessary when drilling into a wall tile.

    Please have a look at the video in the tabs above showing how to use the diamond core bit.

    An indication of the correct spindle speed:

    Ø5.0mm 800 rpm
    Ø6.0mm 600 rpm
    Ø7.0mm 500 rpm
    Ø8.0mm 500 rpm
    Ø10.0mm 400 rpm
    More than Ø10.0mm (>10.0mm) less than 400 rpm


    The tool life will mostly depend on the proper usage and the hardness of the items drilled into. It is normal for a diamond core bit to last up to 10 or more drilled holes in hard tiles. Please remember to always use water when drilling with diamond core bits.


    • Model:
    • Stock Level: Out of Stock
    • Manufactured by: Tork Craft
    • UPC: 6009515804077
    • Category: Diamond Core Bit

    Ask a question about the Tork Craft Diamond Core Bit 8mm For Hard Tiles And Porcelain

    Sorry we ran out!

    Simply enter your details below and we will send you an e-mail when the item is back in stock!

    Secure 128bit encryption. Scan Me !! Visit TechnoPro on ShopMania
    Copyright © 2019 TechnoPro. South Africa - Your trusted online shop
    Parse Time: 3.128 - Number of Queries: 15065 - Query Time: 1.68286935376